Standard Fr Spray Closed Cell Foam Insulation Kit 600bf Spray Closed Cell for Sale

• Type: Polyurethane Foam Machine
• Raw Material: PP
• Principle: High-Pressure Air Type
• Automation: Automatic
• Computerized: Non-Computerized
• Certification: CE, ISO9001:2008
• Model NO.: 600BF
• Product Name: Standard Fr Spray Closed Cell Foam Insulation Kit
• Main Raw Material: Polyurethane
• Foam Type: Closed Cell
• Ratio Between a and B: 1:1
• Foaming Volume: 0.40 M3
• Compressive Strength: 0.18MPa
• Closed Cell Ratio: 95%
• CAS No.: 2323.13213.2
• Transport Package: Paper Box
• Origin: China
• Production Capacity: 100/Month

Product Description

24 hours on-line services:
Contact: Lina Cheng
Standard FR Spray Closed Cell Foam Insulation Kit 600BF Spray Closed Cell for sale

The high-end steel can sprayed two-component polyurethane rigid foam is a two-component A and B composite designed for spraying insulation; it is filled in two pressure-resistant cylinders. The A component is mainly composed of polyether or polyester, foam stabilizer, foaming agent, catalyst, retardant (or) plasticizer, etc. B component is poly Polymeric MDI ,PAPI or modified Polymeric MDI ,PAPI, suitable for small and medium-sized buildings. Spray insulation of walls, roofs, cold storage, storage tanks, passenger cars and hulls.

Product Features  

1.Portable pressure tank packaging, with simple spray gun, infusion tube, etc., no special spraying equipment and power or gas source, the construction is quick and convenient;

2.Fast curing, dry in 30 seconds, cut in 2-5 minutes, fully cured in 1 hour;

3.Closed-cell foam, good insulation effect;

4.Use non-combustible foaming agent for safe construction;

5.Environmentally friendly foaming agent, friendly to the environment.

No.	Item	Unit	Data
1	Appearance	/	Light yellow (The foam after curing )
2	Non-stick time	s	8
3	Foam density	kg/m3	28
4	Thermal conductivity	W/(m.k)	0.026
5	Foaming volume	m3	0.4
6	Compressive strength	MPa	0.18
7	closed cell ratio	%	95
8	Warranty	Month	6

Instructions
1. Before using the tank, it should be kept at least 20 hours (preferably 48 hours) in the environment of 20 ° C - 30 ° C, so that the temperature of the contents of the tank is within the appropriate range (the temperature can not exceed 40 ° C, otherwise there will be a burst tank Danger!). The construction environment or working surface temperature should be above 4 °C;
2. Wear protective goggles, work caps, rubber gloves, and wear protective clothing;
3. Shake the can for 1-2 minutes before use to mix the contents of the container. The horizontal placement of the filling body should be maintained after more than half of the use;
4. Connect the gun, conduit and nozzle before use: Unscrew the valve of the two containers of AB (counterclockwise rotation). The degree of unscrewing of the filling valve affects the spraying pressure of the material. The pressure should be equal, moderate, and all open at the beginning. The spray effect can be achieved. (Note: some valves have a safety lock and need to be pressed to open)
5. After opening the valve, first check the discharge condition of the two materials, and then pull the trigger to adjust the pressure of the two materials, then hold the spray gun, the gun is 1 meter away from the target, and simultaneously pull the two triggers to move in multiple directions. .
6. The surface of the prevention and regularity should be evenly sprayed, and the irregular parts should be sprayed in a concentrated manner. After curing, the sprayed surface should be evenly distributed. The spraying should follow a small number of times as a principle to achieve a good adhesion.
7. If the interval is during the spraying process, the interval should be ≤ 1 minute. If the interval is long, the trigger should be interrupted to prevent the gun head from being blocked. Once the filling body is opened, it is used within one day to avoid the main material solidifying in the conveying pipe and affect the normal use of the system. Unused fillings, if short-term storage is required, the filling valve should be closed first, then the trigger should be pulled to fully drain the residual material in the conveying pipe. Then change the gun head.

PACKING

FAQ

1.What shipping method is usually used to ship the products?Can i make the order online?

   This product can transported by sea,air transport or FedEx, and the price displayed on the platform does not include transportation costs.

    We will calculate the specific transportation costs and inform you.

 

2. Are you a factory?

    Yes, we are a manufacturing factory

 

3. What about the delivery time?

   7 days after receiving deposit