| Type: | Polyurethane Foam Machine |
|---|---|
| Raw Material: | Mixing |
| Principle: | High-Pressure Air Type |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier China CNMC-600 polyurethane pu foam processing machine with low price
The machine has two possession tanks, each for independent tank of 28kg. Two different liquid materials are entered into the two ring shaped piston metering pump from two tanks respectively. Start the motor and the gearbox drives two metering pumps to work at the same time. Then two kinds of liquid materials are sent to the nozzle at the same time in accordance with the pre-adjusted ratio.
ParameterChina CNMC-600 polyurethane pu foam processing machine with low price
| Model | CNMC600 |
| Power source | 3-phase 4-wires 380V 50Hz |
| Heating powe | 1.5KW |
| Driven mode | Pneumatic |
| Air source | 0.5~0.8 MPa ≥0.6m 3 /min |
| Max Raw output | 9 kg/min |
| Spray gun | 1 Set |
| Heating hose | 8 meters |
| Metering pump model | HJ9-100 |
| Entrance diameter | 1/2inch |
| Exit diameter | 1/2inch |
| Rotation speed | 500/min |
| Machine dimension | 750x500x800 mm |
| Machine weight | 150KG |
China CNMC-600 polyurethane pu foam processing machine with low price
SPF offers the following benefits:
Non-Permeable Air Seal
SPF expands to fill all voids and gaps within the framing system, creating a three-in-one Insulation, Air Barrier, and Vapor Retarder system. Traditional insulation systems are subject to unwanted air infiltration, a phenomenon called wind wash. With wind wash, outside air and moisture can be introduced into the wall cavity, greatly diminishing the R-Value. SPF's closed cell structure does not allow air or moisture to penetrate. SPF virtually eliminates the heat loss that is associated with wind washing.
SPF prevents airborne contaminates such as mold, spores, pollens, and dust from penetrating the building envelope.
High R-Value
With an aged R-Value at 6.2 per inch (Closed Cell) and 4.2 per inch (Open Cell) SPF is vastly superior to fiberglass. With the Closed Cell Foam, there are Millions of closed cell bubbles virtually eliminating heat loss through convective air currents within the wall cavity. There is no reduction in R-Value over time as there is with traditional insulation systems.
Quiet
An SPF home has a measurable reduction in outside noise such as traffic, airplanes and barking dogs.
Green
Qualifies for multiple credits in LEED, Energy Star, and other energy saving programs.
No CFCs, HCFCs, or other gasses harmful to the environment. No airborne glass fibers.
Economic
Spray Foam Insulation offers a lifetime of performance and savings to you, the home owner. A typical SPF home pays for the upgrade via energy savings in 3 to 5 years. After that, it is just money in your pocket.
China CNMC-600 polyurethane pu foam processing machine with low price
1. The cylinder solenoid valves are all imported, more expensive than the common cylinders.
2. Free on-line training for technology, full way tracking and testing, high sales volume.
3. All accessories are supplied by the original manufacturer and are available to customers at cost price
4. The high pressure pipe is anti-corrosion.
5. The temperature control meter is dual display, which can display the actual temperature and the set temperature. Other manufacturers can only display the set temperature and can not see the actual temperature. Red meter shows the actual temperature, green shows the set temperature
6. The operation temperature control panel is independent module which can be replaced separately. For other factories ,there is an integrated board next to the temperature control table,if one is broken ,others temerature meters all should be changed .
Learn to maintain machine :
Main Machine Daily Use and Maintenance:
1 Replace DOP in oil cup of primary-secondary pump daily;
2 When equipment stops running, swerve Start/Reset switch to reset direction, making sure cylinder rod fully soaked inside DOP liquid, in this way it can prolong service life of seal ring.
3 Check sensitivity of the equipment heating system, if anything goes wrong, please fix the problem as soon as possible.
4 When equipment isn't working, please turn off heating system timely, for not only it prevents potential danger also avoids low foaming quality cuz polyol material long-time heating.
5 Make sure turning on and off heating system in correct order. When turning on, first start main power,then turn on heating system; when turning off, first stopping heating system then turning off main power.
6 Remember to check if there's enough oil inside oil-water separator and the water expelled from the separator;
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}