| Customization: | Available |
|---|---|
| Type: | Polyurethane Foam Machine |
| Raw Material: | Poly |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
China Hightop CNMC-600 low pressure polyurethane pu foam making machine
The machine has two possession tanks, each for independent tank of 28kg. Two different liquid materials are entered into the two ring shaped piston metering pump from two tanks respectively. Start the motor and the gearbox drives two metering pumps to work at the same time. Then two kinds of liquid materials are sent to the nozzle at the same time in accordance with the pre-adjusted ratio.
1. The cylinder solenoid valves are all imported, more expensive than the common cylinders.
2. Free on-line training for technology, full way tracking and testing, high sales volume.
3. All accessories are supplied by the original manufacturer and are available to customers at cost price
4. The high pressure pipe is anti-corrosion.
5. The temperature control meter is dual display, which can display the actual temperature and the set temperature. Other manufacturers can only display the set temperature and can not see the actual temperature. Red meter shows the actual temperature, green shows the set temperature
6. The operation temperature control panel is independent module which can be replaced separately. For other factories ,there is an integrated board next to the temperature control table,if one is broken ,others temerature meters all should be changed .
Learn to maintain machine :
Main Machine Daily Use and Maintenance:
1 Replace DOP in oil cup of primary-secondary pump daily;
2 When equipment stops running, swerve Start/Reset switch to reset direction, making sure cylinder rod fully soaked inside DOP liquid, in this way it can prolong service life of seal ring.
3 Check sensitivity of the equipment heating system, if anything goes wrong, please fix the problem as soon as possible.
4 When equipment isn't working, please turn off heating system timely, for not only it prevents potential danger also avoids low foaming quality cuz polyol material long-time heating.
5 Make sure turning on and off heating system in correct order. When turning on, first start main power,then turn on heating system; when turning off, first stopping heating system then turning off main power.
6 Remember to check if there's enough oil inside oil-water separator and the water expelled from the separator;
|
Model |
CNMC600 |
|
Power source |
3-phase 4-wires 380V 50Hz |
|
Heating powe |
1.5KW |
|
Driven mode |
Pneumatic |
|
Air source |
0.5~0.8 MPa ≥0.6m 3 /min |
|
Max Raw output |
9 kg/min |
|
Spray gun |
1 Set |
|
Heating hose |
8 meters |
|
Metering pump model |
HJ9-100 |
|
Entrance diameter |
1/2inch |
|
Exit diameter |
1/2inch |
|
Rotation speed |
500/min |
|
Machine dimension |
750x500x800 mm |
|
Machine weight |
150KG |
){kind=link}